![]() ![]() ![]() Thanks to for sharing the original BIOS he received from Asus. It must be set to Legacy ROM if using the iGPU (it hangs with VGA LED lit if in EFI mode, requiring Clear CMOS - inserting the Sandy Bridge and Ivy Bridge GOP drivers made no difference). This is a beta BIOS not released publicly and only boots in EFI Compatible mode with a PCIe GPU installed (this was the main fix to this version). The BIOS itself can be updated using the EZ Flash 2 tool from within the current version, there are no restrictions / flashback on this Z68 chipset. As for soft boot, it is also faster (20 seconds from power on to lock screen) thanks to the reduced POST. You will need: T5 Torx driver Philips 0 or similar sized driver SOIC8 programming clip SOIC8 to DIP8 adapter SPI programmer (a CH341a for about 10 on Amazon works great for this, and comes with the clip and adapter.) A BIOS dump utility of your choice. The IBA screen still appears with the PXE OPROM disabled. Both are capable of booting from the NVMe drive perfectly. LAN chip still detected as 82579LM, and I still dont experience LAN issues on cold boot. (doing this in advance speeds up the BIOS flashing procedure quite a bit and prevents possible ME version clash issues). As for POST, it takes approximately 10 seconds for a cold boot, which is a big improvement. Asus z97 nvme boot Can boot windows on the SM951 on BIOS version 2205, and therefore, we assume, the If you want. (2) Use UEFITool (not UEFITool NE) to open the GIGABYTE Z97 BIOS file, select File->Search, search the text nvme, extract the Nvme.ffs (Right-click. Copy the contents of IntelME.zip to the root of a DOS boot drive, boot from it and run flash.bat ** Your board should be upgraded to ME 8. You can look for UEFITool 0.21.5 here: GitHub LongSoft/UEFITool UEFI firmware image viewer and editor. There are more recent versions of UEFITool, but at the time of writing they don’t let you modify the firmware files for some reason. Microcodes updated to latest available (N.B. To get the NVME modules, I used UEFITool 0.21.5. NVMe DXE driver: NONE → NvmExpressDxe_5 inserted via UEFITool - Updated Clover USB boot worked fine, but wanted to boot directly from Toshiba XG6, and flashed a modded bios with FPTW.exe I dont remember exactly, but after enabling secure boot, screen stayed blank. Please find attached the above BIOS, mods detailed below: Hello everyone, Im also ended up crasing the BIOS while playing with NVME boot on Dell T3610. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |